Can I Install a child seat?

Depending on the model, it is possible to mount a child seat. We have tested this with „free-swinging“ child seats that are mounted on the seat tube. We do not recommend child seats that are installed on the carrier.
We recommend a visit to a bike shop for individual advice.
The following things must be observed:

  • Our Model Juna in size XS unfortunately does not allow the attachment of a child seat, as the seat tube is too short due to the geometry.
  • With models of size S the attachment is only possible to a limited extent. This is also due to space limitations caused by the short seat tube as well, and restrictions if you additionally ride with a low saddle height. However, it does not mean that it is not possible in principle. Get more detailed advice on this in a bike shop, where you can test the spacing further with different child seat models.
    • Please understand that we cannot make a recommendation for size S, as it depends on your saddle position, child seat model preference and comfort level for you and your child.
  • Most child seats that are installed in the front are limited by the manufacturer to a weight of ~15 kg and strongly influence the steering behaviour. We advise against this.
  • Pay close attention to the manufacturer's installation instructions. Damage caused by incorrect installation may invalidate our warranty.
  • For models with LightSKIN LED seat posts, you should also attach a battery light to the child seat, as the original light is hidden.
  • Be aware of the maximum total load of 120 kg including you, child and baggage. If you ever need to pack a little more, we recommend installing a trailer – find out more here!

ampler stellar with child seat

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.