You can either use a seat tube mounted hitch or an axle hitch for attaching a trailer. We sell an adapter that fits most Thule, Burley and Croozer trailers. If you are specifically looking to attach a different trailer, please contact the manufacturer and refer to our axle thread size of M12x1.25. The trailer adapter is used to adapt the Ampler M12 thread of the axle on the rear wheel to a 10 mm mounting point.
But please note that the load the e-bike has to pull has a different effect on the handling - it can shift the centre of gravity and affects the steering of the bike. Also make sure that you can brake properly even with a high load. The battery range will also necessarily be lower, this always depends on many different factors.
Always take proper care when mounting any additional equipment in order not to damage the motor cable or any other part of the bike. Please note that the adapter is not compatible with our older models Hawk, Bilberry or Pennon.
Read here for instructions for how to install the adapter.